How do you use valet pro snow foam?

How do you use valet pro snow foam?

Directions:

  1. Dilute. Foam Lance 1:3 / Pump Spray 1:20.
  2. Foam the entire vehicle.
  3. Leave to dwell but not dry out.
  4. Starting from the bottom, rinse off with a pressure washer.

Do you add water to snow foam?

You should use a (roughly) 3:1 mix of water and Snow Foam, with three parts of water for every one part of foam liquid. The exact quantities can vary, as the thickness of the foam can be affected by the settings of your lance as well as water hardness.

Should snow foam be pH neutral?

Pre-wash cleaners, also known as ‘snow foam’ are available as either pH-neutral or alkaline formulations. Some professional or ‘trade’ pre-wash cleaners, such as those typically found at the local hand car wash tend to be quite caustic, having a pH of 10 or above.

What is pH neutral car shampoo?

What is a Neutral Car wash? A car shampoo that is balanced or is ‘neutral’ has a pH score similar to that of water, with a pH value sitting around 7. A pH that is lower than 7 is considered alkaline, whereas a pH higher than 7 is known as basic or acidic.

How do you dilute car foam?

Method #1 Dilution Ratio Most snow foams state the dilution ratio clearly e.g. 1:10. In this case, you would add 100 mL of product to 1000 mL of water in your foam cannon. Some also state the amount you’ll need in mL or oz. to make things very straight forward to work out how much product you need to use.

Do you wet the car before snow foam?

Should I Use Snow Foam on a Wet or Dry Car? Always snow foam onto a dry car. When you spray snow foam onto a wet car, the water on the car’s surface acts as a barrier between the snow foam and the dirt it’s meant to be cleaning. It also dilutes the snow foam, causing it to turn runny, so it won’t work as effectively.

Can I use car shampoo as snow foam?

Any car shampoo works, but seek out the proper stuff “A proper snow foam formula will be design to cling to the car and work much better than a shampoo,” Lee explains, adding, “The chemicals need to be strong in order to soften and decompose the oils/bugs/general road grime”.

What value of pH is neutral?

7
The range goes from 0 – 14, with 7 being neutral. pHs of less than 7 indicate acidity, whereas a pH of greater than 7 indicates a base. pH is really a measure of the relative amount of free hydrogen and hydroxyl ions in the water.

What is a pH neutral cleaner?

Simply put, a pH neutral cleaner is one that has a neutral pH level. While a truly neutral solution has a pH level of 7, pH neutral cleaners are typically considered to have a pH level between 6 and 8. Considering pH levels when selecting commercial cleaning products is critical to avoid damaging surfaces.

Does snow foam need to be pH neutral?

Do I Need pH Neutral Snow Foam? Chances are, no you don’t. Some people worry that the alkaline cleaning agents in regular snow foam can damage the protective wax and sealants that are already on their car, but most consumer-grade snow foams aren’t alkaline enough to do this.

Is pH neutral the same as pH balanced?

Unlike total alkalinity, which measures the ability of water to neutralize acidity, pH balance measures the actual relationship between acidity and alkalinity. When these two qualities are equally balanced, water is considered “pH balanced” or “pH neutral.”

What is the soap to water ratio for foam cannon?

If this is your first time using a snow foam cannon or the foam gun on your pressure washer, it can be a challenge to get the right snow foam consistency. We recommend starting with a baseline mixture of 1:16, that is, 1 part concentrate to 16 parts water.

Should you agitate snow foam?

So both products are designed to clean the car, but they are formulated differently. Snow foam is designed to clean without agitation, whereas shampoo is designed to be used with a wash mitt.

How long should I leave snow foam on?

Specifically designed to soften dirt, unlike car shampoos which can dry out and leave the marks on the surface of the paint and windows, Snow Foam provides a layer of white foam completely covers your vehicle and this is left to work its wonder, usually for approx 10-15 minutes.