How much horsepower can a Dodge 360 make?
The 360ci (5.9L) Magnum had a rated output between 230 and 250 hp. Nevertheless, engineers underestimated its role as a hard-working truck engine, and its thin-deck cylinder heads often had problems with cracking and warping—especially when run on low-octane fuel.
How much horsepower does a 360 Mopar motor have?
Final numbers on the 360 cubic-inch LA engine were 387 horsepower and 434 lb-ft of torque. That means a net increase of 162 horsepower and 96 lb-ft of torque over the OEM engine configuration.
How much horsepower does a 1974 Dodge 360 have?
For the 1974 Dodge line, a new variation of the 360 was made with a four-barrel carburetor, resulting in 200 hp and 290 lb.
How much HP can a Dodge 360 handle?
After-market support for the 360 is great, and with the right parts, it can easily make 450 horsepower and still have great street manners. If you need more inches, it’s easy to drop in a stroker crank and get 406 cubic inches.
How much HP does a 360 Magnum have?
Magnums today With a high lift cam and single plane intake, the crate Magnum 360 cu in (5.9 L) was rated at 380 hp (283 kW) with the Magnum heads. Later models equipped with “R/T” or aluminum cylinder heads produced 390 hp (291 kW).
What is the Dodge 360 motor?
The 5.9 Magnum is a naturally aspirated 5.9L V8 engine that was produced by Chrysler from 1992 up until 2003. With 360 cubic inches of displacement, the engine is also commonly referred to as the 360 Magnum.
Is a Dodge 360 a good motor?
The Mopar 360 can make an excellent performance engine. It was introduced with a 2-bbl carburetor in 1971. Not intended as a performance engine, it also featured a cast crankshaft and low compression ratio (8.5 to 1) cast pistons.
Is the Dodge 360 a big block?
The fact is, the small block Mopar LA-engines (318, 340 and 360cid) were under-rated at the factory and were the last of the big three small blocks to be offered to the public.
What is the best Dodge engine?
Supercharged 6.7L HEMI® SRT® Hellcat V8 The top-of-the-line, best-in-class Hellcat supercharged V8 engine provides a whopping 707 horsepower with 650 lb-ft of torque. With its 0-60 mph of just 3.6 seconds and a ¼ mile time of 11 seconds, the Hellcat stands out as the top performing Dodge Charger model.
Who made the AMC 360 engine?
Chrysler Corporation
In 1987, Chrysler Corporation acquired AMC and continued manufacturing the AMC “tall-deck” 360 cu in (5.9 L) version until 1991 for use in the Jeep Grand Wagoneer SUV….AMC V8 engine.
| V8 engine | |
|---|---|
| Torque output | 219–435 lb⋅ft (297–590 N⋅m) |
| Dimensions | |
| Dry weight | 600 lb (270 kg) (1956–1967) |
What did the AMC 360 come in?
The 360 was the last AMC V8 to be manufactured. It continued to be produced after Chrysler bought American Motors in 1987 as the standard engine in the Jeep Grand Wagoneer through 1991, with the only modification being the “360” casting replaced with “5.9L” on the side of the block.