How long do cedar rails last?
Built-in Natural Pest Defense Rails above ground can last even longer than that. So, you can count on your cedar split rail fence lasting at least 15 years, if not longer. Some species can last up to 30 years. Few other materials on the market can measure up to that.
What is a cedar split rail fence?
Cedar Split Rail Fencing One of the most rustic fence designs, strongly representative of the simple country life, split rail fencing is composed of just that: two or three split rails, inserted into two equally rough-finished wooden posts. The posts are secured in the ground with or without concrete.
How long does cedar split rail fence last?
Cedar can last at least 15 years, and often as long as 30 years. Compared to that, treated pine will last between 9 and 25 years, depending on the chemical treatment used.
Should I seal my cedar split rail fence?
Staining and sealing are crucial Every fence owner needs to keep on top of this to keep the fence safe from predators. The heat of the summer sun will dry out the wood, causing it to crack. Rain, snow and ice will soak into dry timber causing it to split or break.
Should you seal cedar fence?
Seal your cedar fence every three to five years. Avoid letting excessive amounts of water hit the fence. Preventing rainwater from getting on the fence is impractical. Do not place sprinklers where the water stream hits the fence, even after applying a sealer.
How high should a split rail fence be?
The two standard fence styles are two-rail, which stand about three feet tall, and three-rail, which stand about four feet tall. rails are commonly available in eight- and ten-feet lengths.
How do you keep a cedar split rail fence looking new?
Our 7 tips for maintaining your split rail fence include:
- Use pressure-treated wood.
- Stain the wood regularly.
- Keep plants and grass away.
- Use Fence Armor.
- Choose vinyl for low maintenance.
- Do repairs immediately.
- Regular inspections reduce common problems.
Should I cement in split rail fence?
You shouldn’t set split rail fence posts in concrete, as traditionally, these wooden fence posts are designed to be repairable, and setting them in concrete would make them impossible to replace if they rot. Impermeable soil causes water to sit in the pot your hole created and rot.
How do you keep cedar from turning grey?
How to Prevent a Cedar Fence From Graying
- Clear Weeds and Plants. Clear away any weeds along the fence line, and tie back any plants growing in front of the fence.
- Mix Cleaning Solution.
- Scrub Fence with Cleaning Solution.
- Wash Debris from Fence.
- Let Fence Dry.
- Apply Cedar Fence Stain.
- Reapply Stain as Necessary.
How deep do you dig for a split rail fence?
The best practice is to put 1/3 of the post in the ground. Using a post hole digger or power auger, dig the holes 10 inches to 12 inches wide and 6 inches deeper than needed.
Why choose western red cedar split rail fence?
We stock high quality Western Red Cedar Split Rails and inspect each load for quality to ensure that you get the best products for your split rail fence. Cedar split rail fence is one of the most cost effective styles for defining boundaries, decorating property, and fencing in livestock and horses.
What is the average length of a cedar rail fence?
The standard cedar split rails are generally about 10” in circumference. They are available in 8’ or 10′ lengths. Out of all fencing types, Western Red Cedar split rail fencing is one of the easiest to install, making it a good project for homeowners.
How long do western red cedar fences last?
Due to Western Red Cedar’s natural properties that resist rot and decay, as well as insect attack, Western Red Cedar split rail fences will last for many years with no maintenance. Our Western Red Cedar split rail posts and rails are all individually split, peeled, and formed to expose the cedar’s natural color and grain.
How do you install cedar split rail posts?
Staying along your string line, dig holes for each cedar split rail post, set each post, and insert the split rails into each post while checking each post for plumb and alignment. Then, fill each hole with soil and tamp firmly. Before your next project, be sure to visit us!